Paint That Fills Cracks In Wood

Can You Paint An Old Deck

How to crack paint using wood glue.

Old and weathered wood requires quite a bit of preparation before you can jump into the painting stages, though its entirely possible if done correctly.

In general, you would need to scrape away any old paint, sand away loose wood fibers, and even apply caulk where needed. Afterward, a quick scrub and wash down would leave your old wood ready for a coat of primer.

Do I Need To Prime A Wood Deck Before Painting

As with all painting jobs, you must prime your wood before painting. The main purpose of primer is to enhance the adhesiveness of your paint, which makes it last longer while looking better.

Some primers even block stains from smoke, water, grease, and tannin, which would bleed through otherwise.

The last thing you want is for your nice paint job to still have that nasty grease spill. Above all else, your paint job will have a more uniform finish.

Best For Hot Summers: Sherwin

This is an oil-based stain for wood surfaces that has reflective technology to help keep your outdoor space cool. Special pigments reflect solar rays back into the atmosphere, which in turn lowers the temperature of your deck.

One user noted, I have used Super Deck on upwards of 25 customers fences, garage doors and shutters. It has never let me or my customers down. Properly prepared and applied, it goes on smoothly, doesnt leave lap marks, and creates a great finished product.

You can apply the stain over existing paint or on concrete decks, but you may need to use two coats for it to fully soak in all the cracks and crevices. Its also algae resistant, so its a good option so its a good option for docks as well.

Don’t Miss: Abstract Painting Ideas On Canvas

How To Fill Cracks In Wood Before Painting

How to Fill Cracks in Wood Before Painting? Cracks may seem rather unattractive at one point in time or the other. There are, however, several products available that you could use to maintain a damaged piece of wood from undergoing more damages.

Not only would filling cracks give your wood a beautifying enhancement, but it would also allow the paint to last longer. The presence of cracks or holes in any surface allows for water collection, which causes the paint to peel.

There are a couple of common items such as Wood Putty and Wood Filler that you could use for this project to fix defects while they enable you to have a successful assignment carried out. Wood fillers are used to repair wooden objects, and in the process, they help fix minor defects such as cracks, holes, scrapes in wood, and so on. They tend to hide the imperfections in the wood, making the surface so attractive regardless of the type of wood.

This article consists of several methods by which one can fill cracks in wood before painting, outlined steps, and some tips that would help you have this done successfully. Read through this article and get well-detailed information.

All at a Glance

Tips And Prevention On Filling Up Cracks

How to Repair a Table with Cracked Veneer
  • A face mask must be worn when working with any material, and the purpose for this is to ensure safety at all times
  • Making use of vinegar to get rid of epoxy from the skin
  • A respirator must be worn to prevent taking in wood particles when working, and this is important in making sure you do not breathe in harmful chemicals
  • Cleaning of wood surface can be done using denatured alcohol
  • It is not completely possible to prevent air bubbles, but these bubbles can be carefully removed to prevent further damage. Using air guns will make it easy for bubbles to leave

Below is a list of materials you should have available when trying to fill cracks on wood before painting

Don’t Miss: How To Paint Stucco House

What Is The Best Paint Roller To Use On Old Deck Wood For

In general, the manufacturer of the paint you buy will leave a recommendation for the type of paint roller to use.

However, when it comes to rough surfaces like weathered wood, stick to roller sleeves that are 3/4th of an inch or thicker.

Anything thinner than that, mostly 3/8ths to half an inch, is used primarily for lightly textured surfaces, such as interior walls.

Sand The Surface Properly

Use handheld sandpaper or an electric sander for sanding your wooden surface. Start with rough grit sandpaper and as the surface becomes smoother, switch to sandpaper with a finer grit.

You should never skip the sanding step. Sanding roughs up the surface of the wood so that the primerand paint may adhere perfectly. It also evens out the wood, particularly after using wood putty or filler, leaving you with a smooth surface for applying paint.

Note: Always sand in a similar direction as the wood grain, and remember to wipe off all the sand dust and debris because paint cannot adhere to dirty surfaces.

You May Like: Fun Painting Ideas For Beginners

Best For Stairs And Walkwaystotalboat Totaltread

Your deck is more likely to wear out when exposed to foot traffic, ultra-violet rays, and harsh weather conditions. The Total Boat non-skid paint can come in handy to prevent damages caused by spills, rain, dew, spray, or excessive use of a washdown hose.

The TotalTread bonds are better as they comprise wax texturing agents such as propyltex and polyurethane. This formula is a perfect cure for your damaged deck and can be applied with ease and convenience using a brush or paint roller.

Simply remove the old paint and mix it adequately before applying for an even textured finish. Besides, this non-abrasive paint is anti-slip, so your safety is guaranteed at all times. It also provides optimum traction and prevents particles from clogging.

That said, you just need to dab a little with a brush to keep the surface clean. The paint is best used for decks, steps, docks, ramps, poles, cabin tops, and more. You can apply two coats for a firm grip or three coats for a more aggressive grip.

There are different colors available, so you can choose whichever is best for you. First, however, you need to make sure that youre choosing a color that matches your surroundings.


Rust-Oleum is one of the famous veterans in the paint industry. It has been there since sliced bread, and their product deserves a glance when anyone searches for paint for wood decks.



Consider The Type Of The Best Epoxy For Filling Wood Cracks

Wood Crack Repair Filler & Sealer Coating on Decks, Railway Ties, Timber, Wood Walls

The best epoxy for filling wood cracks is the one that can fit all the needs of a person. It must be durable, comfortable, and easy to clean. The best epoxy for filling wood cracks must also be flexible enough to accommodate different body shapes. It’s used for relaxation and as a place to wash your hair. But what makes the best epoxy for filling wood cracks unique is its personality, which its owner can determine.

1.1. Three-wall alcove

The bathroom is a very intimate space. It’s where you first feel comfortable in the morning, and it’s where you go to relax after a long day. And with the help of the best epoxy for filling wood cracks, you can get rid of those pesky clothes and enjoy your time there. The tub-shower combination is the most common best epoxy for filling wood cracks type. It has the advantage of having a wide surface area and many taps. The disadvantage is that it’s usually not as spacious as a standard best epoxy for filling wood cracks.

A wall-mounted shower is a typical accompaniment. It is an accessory that can be installed anywhere. It helps in making the bathroom more attractive and more functional.

1.2. Drop-in

1.3. Undermounts

Undermounts are the best options for the best epoxy for filling wood cracks. They are attractive and provide a good, steady flow of water.

Undermounts are designed to fit into the bathroom without disturbing the floor. They have a small footprint and can be installed in almost any bathroom.

1.4. Corner

1.5. Freestanding

Recommended Reading: Is Benjamin Moore Paint Good

The Ease Of Application

Generally, deck paints are easy to apply, and this is because most of them dry quickly and come with even coverage.

Additionally, most deck paints come with second coat provisions, especially on the 3rd and 4th days after the first coat was applied.

However, please note that the ease of applying the deck paints will depend on the level of preparation and weather conditions at the time.

You will get better results if you apply your deck paints when temperatures range between 50 and 90 degrees.

You must ensure that your painting area is free from substances, including stain, grease, and clean to ensure proper adherence of your deck paint to the surface.

Can I Paint And Stain My Deck

Yes, you actually can! Once youve finished painting, looking into a decent solid stain.

When talking about stains, most are usually referring to transparent stain, the type that soaks into your wood surface. Solid stains play a role similar to paint, sitting on top of the surface of your wood and providing a thin film for protection.

You May Like: The Best Painting In The World

What Is The Difference Between Wood Putty And Wood Filler

  • Wood putty is a paste thats applied with a putty knife. It dries to form a solid surface, and youll need sandpaper to smooth out the wood surface before painting.
  • Wood filler is made of sawdust or ground wood particles in water its mixed until its like dough, then applied with a putty knife. After drying completely and being sanded down, the surface can be painted over.

Prevention And Tips When Filling Cracks In Woods

Ronseal 275g High Performance Wood Filler Interior Exterior Crack Hole
  • A face mask and latex hand gloves should be worn when you want to work. This is essential for our safety.
  • You should wear a respirator in a bid to avoid inhaling wood particles that have been left in the air. However, working with chemicals could be hazardous.
  • At any point in time, you will come across air bubbles, and as it were, you cant prevent them, but you can carefully remove them without causing any problem. Also, you take a hot air gun and move it over the surface in motion. This will enable the bubbles to leave.
  • You can make use of vinegar to remove epoxy from the skin.
  • With the help of denatured alcohol, you can clean epoxy off the surface area.

Also Check: One Time Exposure To Lead Paint Dust

Best Overall: Dap Plastic Wood All Purpose Wood Filler

  • Can be nailed or screwed

  • Can be hard to squeeze out of tube

  • Few complaints about colors not being as described

What do buyers say? 89% of 3,600+ Amazon reviewers rated this product 4 stars or above.

Coming in as our number one pick is DAP Plastic Wood. This all-purpose, water-based latex wood filler is formulated with real wood fibers. It looks and acts like actual wood, except once it hardens, it’s three times as strong. You can sand, drill, cut, stain, and paint it without worrying about splitting, shrinking, or cracking. It even works as a sturdy anchor for nails and screws.

DAP’s heavy-duty, professional-grade filler comes in multiple finish colors, including natural, golden oak, red oak, walnut, and white. The no-mix formula makes it easy to spread in an even, smooth layer on your furniture, doors, windows, or woodwork. Because it has little objectionable odor, it’s a great choice for interior projects in rooms without windows that easily open. And once you are finished, this wood filler cleans up easily with just soap and water.

Type: Water-based | Dry Time: 2 hours | Available Range of Colors: 5 | Interior/Exterior Use: Both | Cleanup: Soap and water

Filling Cracks With Glue And Sawdust

  • 1Get sawdust that matches the type and color of your wood. Sawdust is used to cover the white glue and blend the crack, so it needs to match the wood youre treating as much as possible. For the best blend, get some sawdust from the wood by sawing or sanding it.
  • When this isnt possible, purchase a bag of sawdust from a home improvement store.
  • 2Squeeze wood glue into the crack. Get a bottle of wood glue from the store. Press the nozzle against the crack and squeeze the container until the glue fills the entire space you need to repair. For small cracks, you may also use a syringe to ensure the glue gets all the way down inside the crack.XResearch source
  • 3Cover the glue with sawdust. Layer a lot of sawdust over the glue to completely cover it. Rub your finger over the crack to ensure the glue holds the sawdust in place. When youre finished, the sawdust should hide the glue from view, blending in with the rest of the wood.XResearch source
  • 4Let the glue dry overnight. Leave the glue to rest until the next day. When the glue is completely dried, the crack should be hard to see. If its still visible, reapply the glue and sawdust combination or a different filler.XResearch source
  • 5Sand the crack smooth. Go over the crack with a piece of fine grit sandpaper that’s between 120 and 220 grit. Carefully rub down the treated area until the filler is flat and unnoticeable.XResearch source
  • Also Check: Amazon Paint By Numbers For Adults

    Best Budget Choice Paintthompsons Waterseal Th043841

    Thompsons WaterSeal is another veteran in the paint and sealing industry. Its been operative since the early 1920s and has emphasized resisting water damage in exterior areas from the very beginning. For this reason, the company focuses on waterproofing deck paints.

    This waterproofing stain is available in six shades and adds the finishing touch to your old weathered wood. They include woodland cedar, maple brown, coastal gray, acorn brown, sequoia red, and harvest gold.

    In addition to making your deck visually appealing, the paint also excels in boosting the durability of this surface. It also offers protection against mildew and UV rays. In addition, the advanced polymers make the shade even more resistant to fade.

    That said, you can either apply the paint on dry or damp wood, whichever thats convenient to you. The stain also dries up within two hours, so you wont have to wait longer before you can use your deck.

    The best part is that you can apply a single coat and use it for up to five years before repainting. Unsurprisingly, this single coating will last up to 15 years when applied on a fence.


    • This stain comes in six solid shades, including golden
    • The paint offers protection against mildew and UV-rays
    • It can be used either in a dry or damp wood
    • The paint incorporates advanced polymers that show resistance to fading
    • The formula can cover a significant area of up to 400 square feet of exterior space


    Best Budget: Elmer’s Carpenter’s Wood Filler Interior

    Using Tile Grout to Fill Cracks in Wood

    Courtesy of Amazon

    • Thick enough to easily fill deep holes and gouges

    • Not for exterior use

    • Can dry and clog inside the tube once opened

    If you need to patch damaged wood inside your home, and want to watch your budget, the best choice is Elmer’s Carpenter’s Wood Filler Interior, which is a solvent-free, low-odor wood filler that dries to a smooth finish within 12 to 24 hours. This little tube makes it easy to apply to cracks, splits, and holes on your wooden surfaces, whether furniture, trim, or floors. It has a thick texture, which makes it suitable for holes or gouges that are fairly deep, but can be a little trickier over shallow scratches.

    It’s formulated to resist cracking and shrinking and can be sanded to a perfectly smooth finish. Once dry, you can paint over the white color to match your floorboards, molding, cabinets, doors, or furniture. You can drive nails or screws into it, as well. This reasonably priced wood filler cleans up easily with soap and water.

    Type: Water-based | Dry Time: Up to 12 hours | Available Range of Colors: 1 | Interior/Exterior Use: Interior only| Cleanup: Soap and water

    Recommended Reading: Easy Canvas Painting Ideas Free

    Using Wood Putty Or Wood Filler

    It is very crucial that you wood filler you make use of has the same color as the wood you want to work on, and preferably, you can make use of a crayon shaped wood putty or wood filler. The truth is so many wood fillers comes in various shapes and colors, so finding the one that best matches your wood is of significant importance. You can use your fingers in filling up cracks on wood with the wood filler, and ensure you spread the filler in crack using your fingers.

    On the other hand, you can opt to use a putty knife in filling up cracks on wood, and sanding later and cracking flat and regular surface will ensures everything blends perfectly. Flattening the material properly is necessary before the wood gets dried, but there is completely nothing to worry about if there is no putty knife available. However, this should be carefully done to make sure that debris doesnt interfere with what you are doing.

    Furthermore, you should give the wood filler up to eight hours to get dried, while a light of fine grit sandpaper should be used to make the surface smooth. This step will also help in getting rid of excess wood putty that is left on the surface of the wood.

    What Kind Of Paint Do You Use On Old Wood

    As we did with the preparation process, the treatment of weathered wood requires a bit of extra work when it comes to the paint job too.

    For weathered wood, the combination of a high-quality oil-based primer and acrylic or latex exterior paint is hard to beat. The porous qualities of the latex paint on top of the protection from the oil-based primer mean your old wood will look youthful without much effort.

    Additionally, a second coat provides better protection while making your paint job last longer.

    Also Check: How To Match Wall Paint


    Related articles