Olympic Poxolon 2 Epoxy Pool Coating 1 Gallon Bikini Blue
- Olympic Poxolon 2 – the easy choice in two-coat epoxy pool coatings.
- From Olympic, the most trusted name in swimming pool paint since the 1950s.
- Applies thinner than Zeron. Includes catalyst.
- Two coats ensure it will last up to 5 years. Apply with roller or airless sprayer.
- Coats plaster, gunite, and fiberglass finishes.
- An Epoxy Primer is recommended on bare surfaces.
- COVERAGE: Approx. 225-250 sq ft per gallon.
Back Order Expected to Ship on
Back Order Expected to Ship on
Next Day DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingShips from VendorContinue ShoppingShips from VendorContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue Shopping
We Stand For The Finish
Kelley Technical Coatings, we put seven decades of experience behind our work, offering some of today’s most enduring paint and coatings products from a company with proven, high-quality service.Our precision engineering standards provide quality formulations to an ever-increasing array of companies and industries – with masterful results. Since 1949, we’ve earned our customers’ loyalty with our total commitment to their satisfaction.
Olympic 2226/gl Poxolon 2 Epoxy Pool Coating 1 Gallon Bikini Blue
- Olympic Poxolon 2 – from Olympic, the most trusted name in swimming pool paint since the 1950s.
- The easy choice in two-coat epoxy pool coatings! Includes catalyst.
- Two coats means it will last up to 5 years. Applies thinner than Zeron. Apply with roller or airless sprayer.
- Coats plaster, gunite, and fiberglass finishes.
- Epoxy Primer is recommended on bare surfaces.
- COVERAGE: Approx. 225-250 sq ft per gallon.
Next Day DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingShips from VendorContinue ShoppingShips from VendorContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue ShoppingGround DeliveryContinue Shopping
Don’t Miss: Modern Office Office Paint Colors
How To Apply
Once you have followed the correct surface preparation procedures for your swimming pool, you will be ready to apply your new surface. Remember that the surface preparation is of primary importance. If these instructions are followed you should not encounter any new surface problems.
APPLYING EPOXY COATINGS
The POXOLON 2 System
If applying POXOLON 2 to a bare surface, be sure to use the appropriate primer, depending on the surface. When recoating old epoxy, make certain that all glossy surfaces of the old epoxy are dulled down by light sanding. Most important! Prior to the application of any coating follow the three step cleaning process. Use a 9″ roller cover with a solvent resistant core. While coating, use firm even strokes with plenty of product in the roller to “squeeze” the coating into the porous surface. This will insure good adhesion. Apply the second coat of POXOLON 2 when the surface is dry enough to walk on without marring the finish. You will get more coverage out of the second coat and it will be quicker to apply.
Allow the second coat to cure as recommended on the curing schedule below before filling your pool with water.
Coverage: 225 – 250 square feet average per gallon
The ZERON System
Coverage: 125 – 150 square feet average per gallon
Curing schedule for POXOLON 2 and ZERON before filling pool:
For steps, shallow areas and wading pools, we recommend sprinkling white sand or marble dust on the coating before it dries to make the area slip-resistant.