How To Paint Pvc Pipe

Can You Paint Pvc Pipes Complete Guide

How to paint PVC and plastic downpipes – Inspire DIY Kent Thomas

Have you ever wanted to change the look of your home but didnt want to spend a lot of money? A straightforward way to give your home a new look is by painting your PVC pipes. Instead of throwing out old PVC pipe, why not give it a fresh coat of paint instead?

Yes, you can paint PVC pipe! There are many different ways to paint PVC pipes. You can use spray paint, acrylic paint, or any other type of paint that you want. Just make sure that the pipe is clean and dry before you start painting. Have fun with it and be creative!

Well, youre in luck! You can easily paint PVC pipes to give your home a new look. All you need is some paint and a few simple tools. Keep reading to learn how to get started.

  • Related Articles
  • Is There A Uv

    In general, we could argue that all PVC pipes are UV resistant to an extent. However, just because they are resistant does not mean that they will survive under long amounts of exposure to the sun. They can last a few hours but once you do this on a daily basis, the stress continues to build on the pipe, causing it to break.

    Some companies may try to claim their PVC pipes will be fine in the sun. But we say, rather be safe than sorry. Taking the time to prime and paint your pipes at the beginning will guarantee that you will not have any problems with UV exposure.

    If your aquaponics system is indoors, you dont have anything to worry about in terms of UV exposure to your pipes. But for anyone doing an outdoor system, use paint for PVC pipe UV protection.

    When you go to the hardware store to purchase your pipes, talk to the staff to find the right paints to protect against UV rays. Buy everything together so once you are ready to install your pipes you can do it all in one go.

    With aquaponics, we always stress having a good plan and taking all the necessary precautions prior to installing your system. If you take the time before you start to avoid any problems, it will save your time, money, and headaches in the future.

    Using paint for PVC Pipe UV protection is one of the best things you can do to set yourself up for success.

    Feel free to comment and ask questions!

    Wipe The Pipe Clean And Let It Dry Off

    Once the pipe is smooth and even, its time to get the acetone and a clean rag. This step is simple just dampen the rag or cloth piece with the acetone, and clean the pipe as best as you can. Remember to use your rubber gloves for this step as well as to open all windows in the garage if you havent already as well as remove all heating devices and potential fire-starters from your immediate area.

    The purpose of this step isnt just to remove all the sanding dust off the pipe but also the properly drench the surface of the PVC pipe with acetone. This is important as that will temporarily swell the surface area of the pipe, open up its surface pores, and make it even easier to spray paint.

    After that, let the pipe dry off adequately for at least 20 minutes to half an hour. You dont want to paint over a wet pipe but you also dont need to wait unnecessarily long.

    You May Like: How To Paint Floor Wood

    When To Paint Pvc

    Polyvinyl chloride is a common plastic-like material used in multiple building applications. You’re probably most familiar with it in the form of large white pipes used for plumbing and draining. Indeed, this is probably the most common use for PVC.

    With that said, PVC has caught on for use in other building projects. In many of these cases, you’ll want to hide that bright white pipe under a coat of paint. Here are just a few PVC materials that are frequently painted.

    Ultimate Guide For Pvc Pipe

    What Kind Of Paint To Use On Pvc  View Painting

    Although working with plastic pipes is easy, you still need plastic pipe guides to get the best results. As PVC has replaced most alternatives that have existed for years, you must learn its basics as you may need to use it one time in your life.

    There are several benefits that the industry has seen after shifting to using these plastic pipes for home improvement. PVC pipes are widely used for indoor water supply projects. If you are looking for water supply pipes, you can find more about Pipe products from LESSO

    You May Like: Rust-oleum Universal High-gloss Clear Spray Paint

    Now Apply Spray Paint

    Now take your spray paint. Use extremely high-quality product that can fight off a variety of weather conditions.

    The most important being rusting, which is key because what you are working on is a part that comes into contact with water.

    Shake it up thoroughly with incredibly ease simply by giving it around 7 seconds of vigorous shaking. Using a side-to-side sweeping motion, paint the pipes, starting at the top and going down to the bottom.

    Remember to go in thin coats so you dont ruin any finished areas and keep overlapping your coatings as you go down the pipe!

    S To Painting Pvc Pipes

    Exercising caution when handling paints and other chemicals is always a must, whether were talking about acrylics, latex paints, or cans of spray paint. If street artists know to be protected when painting murals on the sides of buildings, you should be careful when painting PVC pipes in your garage too. Heres how you should best approach the whole process:

    Also Check: Oil-based Exterior Paint Home Depot

    How To Bend Pvc Pipe

    Bending PVC pipes is a simple procedure. You first need to cut the pipe to the desired size. Then go ahead and tape one end. Go ahead and pour enough sand to almost fill the pipe and tape the other end too. That will ensure you can heat the pipe without any kinks.

    Go ahead and heat the pipe thoroughly and bend it to the desired shapes using gloved hands. Pour out the sand after getting the desired shape. The best thing about this technique is that you can get any shape you want.

    Do I Need To Prime Plastic Before Painting

    How to Paint PVC Pipe – how to color pvc #pvc

    Ans. Priming before painting is a must if youre painting the pipe with a brush. The specialty primer can create a foundation that helps the paint stick. However, spray paint doesnt need priming, but as established in the piece above, scouring the pipe with sandpaper is a must before spray painting.

    Read Also: Touch Up Paint For Cars

    How Long Does Paint Last On Pvc

    As for how long the paint will last depends on a few different factors. The thicker and more coats of paint, the longer its going to last. If youre painting over an existing surface, then it may not last as long as if you were to prime it first. How many coats of paint that you apply also makes a big difference in the life of your PVC pipe.

    Perfect Guide On How To Use Paint For Pvc Pipe Uv Protection

    Last Updated on January 23, 2022 by Fabiola L.

    An important part of any aquaponics system is pipes. If you want to know how to use paint for Pvc pipe UV protection, you have come to the best place!

    Pipes are a very valuable piece of hardware for your aquaponics system. This is because it is the thing that moves the water back and forth into your system. Most often, people use PVC pipes to do this.

    However, a lot of plastic is susceptible to degrading if not cared for properly. When pipes are left outside in the sun, they can quickly become ruined. Not only does this waste your time because you have to replace the piping, it also is costly.

    You do not want to be in the habit of constantly buying piping because you didnt take proper care of it. One way to protect your pipes from UV damage is to paint them.

    Read on to find out how to use paint for PVC pipe UV protection.

    Don’t Miss: Abstract Acrylic Painting On Canvas

    How To Cut Pvc Pipe

    Whether you are DIY or working with PVC pipes as professionals, it is necessary to learn how to cut pipes using various tools and methods. It will help save the costs of taking every piece you would like to cut to the hardware. The following step-by-step PVC pipe cutting guide has all you need to know about cutting pipes.

    What Glue Do You Use For Pvc Trim

    PVC Pipe Heart Decoration

    Titebond Ultimate PVC Trim Adhesive and Sealant is a one-component, advanced polymer adhesive sealant designed for a variety of PVC trim, moulding, deck railing and beadboard installations. It adheres and seals PVC trim to virtually any material including wood, metal, masonry, other PVC trim and more.

    Also Check: How To Paint With Acrylic

    Can You Paint Plumbing Pipes Pipes

    Yes, you can paint plumbing pipes. Just make sure that you clean and prime the surface before applying your different colors of latex or oil-based paint. You should be fine if any other type of paint has been added in the last 24 hours, but you may want to apply primer first to get the best adhesion for your surface.

    Prep The Necessary Additional Tools

    Painting a PVC pipe is a time-sensitive process with pretty precise time frames and pauses needed between each phase. So, if you want everything to go smoothly, its smart to prep all the gear youd need ahead of time so that there are no unnecessarily long breaks. The things wed suggest getting ahead of time include:

    Grit sandpaper, specifically 220-grit sandpaper quite a lot of it too, especially if you have lots of pipes to cover

    • Face covering mask and goggles
    • A good paint brush if youre not using a spray can
    • Acetone again, lots of it if you have lots of pipes to paint
    • Newspapers, old rags, and other covers for the surfaces in your work area you want to keep clean

    These are more or less the must-haves but you should really plan your own process ahead of time and think about what else you might need.

    Recommended Reading: Can You Paint Bathroom Tile

    Protect The Environment From Paint Splatter

    Cover all the areas subject to overspray or paint splatter, then lay the pipes for spraying. If youre spray painting long PVC pipes, you need to protect the ladder or chair and the wall against the spray.

    Or you may choose to stand the long PVC pipes on a dowel, and then youll access all sides faster.

    What Is Purple Primer Used For

    Painting PVC down-pipes easily with Dulux Weathershield

    Purple Primer accomplishes two things. First, it will clean the pipe and fittings of any dirt, oil, grease and other foreign matter. If the plastic is dirty before making a connection, it will be more difficult for the cement to bond the pipe and fitting together. Second, Purple Primer will soften the plastic.

    Read Also: Hotels Near Ppg Paints Arena Pittsburgh

    How To Protect Pvc Pipe From Sunlight

    PVC pipe stands for polyvinyl chloride. When this was invented, it was a great tool in replacing metal or lead pipes. Now, PVC pipes have become the most commonly used pipes for plumbing and drainage.

    One of the benefits of using PVC pipes is that it is very versatile, lightweight, and cheap. This makes it easy to do construction. That is why you will be using PVC pipes for your system.

    PVC pipes come in many different diameters and all different lengths. You can easily cut them to fit the exact size you need.

    Learn more about: The Amazing Facts About Sump Pumps For Fish Tanks

    If PVC pipes sit in the sun for a long time, they will begin to change color. You can notice this by seeing some lighter grey to white spots forming on your pipe.

    Over time, these spots could completely break down and cause your pipe to be unusable. Although they can tolerate some UV rays they are not 100% UV tolerant.

    Luckily, humans invented another useful tool to go with the PVC. There is special paint available that you can use to coat your PVC pipes in order to protect them from the over-exposed sun.

    This paint is called PVC primer paint. It is water-based latex paint and can be easily found at any hardware store.

    Before painting, you need to make sure your PVC pipes are clean from any debris. Wipe them down with a towel ensuring no spots are missed.

    Find more information about Is Pvc Pipe Food Safe? All The Answers Here!

    Can You Glue The Painted Pvc Pipe

    Yes, you can glue painted PVC pipe. It may take 24 hours or more for everything to dry and adhere correctly properly. You may need to use a primer like Kilz-2 first on the PVC pipe before its completely dry. Once this has been applied and fully dried, you can apply your adhesive of choice onto the surface and stick them together.

    Read Also: Can I Paint Vinyl Siding

    Painting Pvc Pipe: What It Is All About

    The following guide on painting PVC is designed and illustrated so that everyone will be able to understand, regardless of their settings, backgrounds, and amount of working experience with PVC.

    PVC, although easy with activities like cutting and gluing, the painting comes with different levels of difficulties and challenges. While PVC piping comes with all types of brights these days, youll still need to learn how to paint PVC if you have a more subtle palette in mind.

    Painting PVC is not as easy as it seems. It comes with a special type of molecular makeup that prevents most liquids from bonding to their surface. Paint on PVC tends to bubble, flake, or rub right off.

    However, theres one piece of good news for all the persistent DIYers out there. Fortunately, there have been groundbreaking developments in spray paints that allow bonding with all kinds of plastics, let alone PVC.

    Although some plastic-rated paints do not require any special preparation to be applied, however, follow the below procedure to make minimal mistakes and get the best results.

    Procedure To Follow To Paint Pvc Pipe

    Fluid acrylic painting using pvc pipe pour and puddle pour. Watch the ...
    • Step 1: Prepare Your Work Area
    • Step 2: Sanding the Pipe
    • Step 3: Cleaning the Pipe
    • Step 4: Protection Against Splatter
    • Step 5: Applying Spray Paint
    • Step 6: Applying the Second Coat
    • Step 7: Let it Dry for 24 Hours

    Step 1: Prepare Your Work Area

    Painting PVC on a low-humidity day will be a great choice, ideally between 50 and 85 degrees Fahrenheit. An ideal location would be a well-ventilated yet wind-free area a good example is a garage with doors and windows open with airflow. Acetone is a highly flammable chemical, so it should be used and stored away from heat sources. Note that you should not while working with acetone and wash up well once the work is done.

    Step 2: Sanding the Pipe

    Rub the exterior of the pipe by hand with 220-grit sandpaper. You might think about using an electric sander, but rubbing sandpaper manually works best as an electric sander can wear the pipe too much and too fast. Sand in all directions properly to avoid any undesirable grooved surface. Be gentle it is also very important not to be hard on the pipe.

    Have a lot of sandpaper on hand because the waxes of PVC pipe will come off on the paper, making it lose its roughness.

    Step 3: Cleaning the Pipe

    Wear rubber gloves, damper a clean rag with acetone, and then wipe the surface of the pipe. Let it be the way it is for 20 -30 minutes to dry. The acetone works as a removal agent, taking off all the access sand and swelling the surface of the PVC pipe to make it more porous for painting.

    Read Also: Interior Paint Cost Per Square Foot

    What Kind Of Paint Will Stick To Pvc Pipe

    Most methods to paint PVC pipe involves the use of epoxy-based paints. These paints can cause serious harm to an individual if not used properly.

    What is the best paint to use on PVC?

    Krylon Fusion is a consumer favorite thats widely available you can pick up a can on Amazon for about $5). Shake thoroughly for 15 to 20 seconds. In a side-to-side sweeping motion, spray-paint the pipe, starting from the top and working your way down to the bottom.

    Can you paint PVC piping?

    If youre hand-painting the PVC, apply a light layer of primer and allow it to dry, then brush on the first coat of paint.Let the paint dry for 24-48 hours before applying another coat. If you want to learn how to measure and cut your pipe before you start painting, keep reading!

    Can plastic PVC be painted?

    PVC can be painted but it has to be prepared correctly and it needs to be painted with paints that are formulated for PVC.

    Related Question Answers:

    Pvc Pipe Painting: Post

    Now that you know how to paint PVC pipe, here are some additional tips, so your DIY project goes more smoothly:

    • Once the paint has dried completely on your PVC pipe, its best if you wait 24 hours before using them. Otherwise, any paint that is not dry can peel off while youre handling the item.
    • If you want to change your color scheme or simply buy a different colored PVC pipe, then you may have to sand the paint off.
    • It is best not to paint directly in an area with high traffic/activity since any bumping or knocking against the surface can easily damage the painted PVC pipes.
    • If there are small bits of paint on your PVC pipe, you can use some sandpaper to lightly rub them off.
    • Dont forget to wear latex gloves and safety glasses during the painting process.
    • If you are worried about getting paint on anything else in the area, then keep a cloth or paper towel handy to wipe it clean quickly.

    Recommended Reading: Best Paint By Number Kits


    Related articles